Chainsaw Maintenance

August 13, 2026

Chainsaw Starts Then Dies? Record the Pattern Before Repair

A petrol chainsaw that starts then dies usually needs its fuel, starting procedure, air path, or fuel-delivery system checked—not another round of random carburetor adjustments. Stop repeated starts, use the exact operator manual, and record when the engine stops; that pattern tells you which owner-level check is worth making. First, make the saw safe to inspect Let the engine cool. Engage the chain brake, switch the saw off, and work outdoors or in a well-ventilated place away from ignition sources. Fit the bar cover whenever you are not checking the cutting attachment.

Read More arrow_forward

Ownership

August 12, 2026

Chainsaw Spare Chain Checklist: Record the Fit Before You Buy

Before buying a spare chainsaw chain, record the pitch, drive-link gauge, drive-link count, and the approved chain family for the exact saw-and-bar combination. Bar length or saw model alone is not enough to confirm fit. The useful outcome is not “a chain that looks close.” It is a short record you can take to a dealer, use in a manufacturer parts lookup, and attach to the spare loop after purchase.

Read More arrow_forward

Buyer Guides

August 11, 2026

Electric Chainsaw Sharpener vs File: Choose by Workload and Damage

Choose a hand file for portable touch-ups and a bench electric sharpener when several removable chains or uneven cutters justify a fixed, repeatable setup. Neither method identifies the chain, chooses its specification, checks depth gauges, or decides whether a damaged chain should be replaced for you. Start with the jobs you actually have Don’t compare motor power with the price of one file. Write down the next three likely sharpening jobs: where they will happen, how many chains will be waiting, and whether the cutters need a light edge touch-up or correction after contact with soil or another abrasive material.

Read More arrow_forward

Chainsaw Maintenance

August 10, 2026

Chainsaw Bar and Chain Maintenance: Clean, Inspect, Decide

Chainsaw bar and chain maintenance starts by making the saw unable to start, removing the cutting attachment as its manual directs, and cleaning until the wear surfaces are visible. Then use what the clean parts show to choose one action: reassemble, correct lubrication or tension, sharpen a serviceable chain, replace a worn part, or arrange service. Start with an inspection, not a running test Let the saw cool. Follow its manual to prevent an accidental start: that usually means removing the battery, unplugging the cord, or using the gasoline model’s specified shutdown procedure. Engage the chain brake where the manual calls for it, wear gloves when handling the cutters, and remove the bar and chain only by the model-specific method.

Read More arrow_forward

Maintenance

August 09, 2026

How to Store a Chainsaw: Gas, Battery, and Corded Checklist

To store a chainsaw, disable and separate its power source, clean and inspect the cutting attachment, fit the guide-bar scabbard, and keep the saw dry and secured. For fuel treatment, battery charge, storage temperature, and bar-oil level, follow the exact saw and battery manuals—manufacturers give different instructions. Write down four instructions before touching the saw Find the storage section in the saw manual and, for a cordless model, the separate battery and charger manuals. Record four answers on a tag:

Read More arrow_forward

Chainsaw Sharpening

August 07, 2026

Chainsaw Depth Gauge Symptoms: Too High, Too Low, or Not the Cause?

Depth gauges that sit too high can limit how much wood the cutters take; gauges filed too low can make the chain grab, chatter, and cut too aggressively. Those symptoms are clues, not proof—inspect the stopped chain with the correct manufacturer-specified gauge before removing any more metal. Read the cut, then verify the chain A depth gauge is the raised part immediately ahead of each cutter. Its height relative to that cutter controls the bite. Because sharpening shortens the cutter, the relationship changes even when the depth gauge itself has not been touched.

Read More arrow_forward

Maintenance

August 04, 2026

Chainsaw Oil Leaks When Stored? Trace the Drip Before Repairing

A few oil spots under a recently used chainsaw can be bar oil draining from the guide-bar groove, chain, clutch-cover area, or recesses in the saw body. A clean spot that keeps growing, begins away from the cutting attachment, or returns after the saw has been cleaned and left unused deserves a model-specific inspection rather than an assumed repair.

Read More arrow_forward

Maintenance

August 03, 2026

How to Identify a Chainsaw Chain Before Buying a Replacement

To identify a chainsaw chain for replacement, confirm three values: pitch, drive-link gauge, and the number of drive links. Read them from the guide bar, chain markings, packaging, manual, or manufacturer lookup before attempting to measure a worn chain. Bar length alone is not a chain size. Two saws described as having the same bar length can use different drive-link counts, and a pitch label does not tell you the gauge.

Read More arrow_forward

Chainsaw Safety

August 02, 2026

Chainsaw Storm Cleanup Safety: Decide What Not to Cut

Safe chainsaw storm cleanup starts by deciding what not to cut. Leave anything near a utility line, overhead, standing or leaning, tangled, under visible tension, or attached to an unstable root plate for the utility or a qualified tree professional; an experienced homeowner’s possible work area is limited to stable, separated debris on the ground. Storm damage is not ordinary firewood. Limbs can be bent under other limbs, broken tops may remain overhead, logs can roll when support is removed, and an uprooted tree can shift toward its old position. A sharp chain and a familiar saw do not remove those hazards.

Read More arrow_forward